I am not usually bulk-rolling film, but not long ago, I got hold of a 100ft roll of Agfa APX100 for very cheap money. I decided to give it a go, as I have previously been very fond of affordable films like the Fomapan 100 which I also tend to bulk-load, as it is relatively inexpensive to do. I have found my way of exposing and developing Fomapan 100 that gives me the results I want. This method includes exposing at EL 50 and shave 20% off the recommended development time with Kodak Xtol 1+0.
As the Agfa APX100 is a brand new film for me, I decided to shoot it at box-speed and develop as the massive development chart suggests. As Kodak Xtol have been out of stock in Norway for a very long time now, I decided to use Ilford ID-11 to develop this film. I chose the dilution 1+1.
Winter leaves as Spring emerges – Konica Autoreflex TC – 50mm Hexanon f1.8 – Agfa APX100 Ilford ID-11 1+1
Immediately, when looking at the negatives and their scans, they appear slightly under-exposed, and it is clear to me that this film needs more exposure than I gave it at this first tryout. Especially definition in the darker areas is easily lost, and I think that a slight pull could give me a flatter negative that will be easier to work with in post-processing. My next roll will be tested with the method I use for Fomapan 100, and I will evaluate those results as well.
Spring by a frozen lake – Konica Autoreflex TC – 50mm Hexanon f1.8 – Agfa APX100 Ilford ID-11 1+1
For this test, I chose to go with the Konica Autoreflex TC. A camera I bought this autumn and that I have found to work very well and be reasonably accurate at shutter speeds faster than 1/60, which is the area in which I chose to shoot this time. The lens is a very standard Hexanon 50mm f1.8, a lens that is reasonably sharp and is easy to focus. Some of the images were shot using a yellow filter and some without the yellow filter.
The film has the amount of grain that I would expect from a 100 ISO traditional film and it seems to me as it behaves very much like the Fomapan 100 in its sensitivity. The lighting conditions on the day were quite contrasty, and I find that to be very clear from the negatives. They seem more contrasty than I would expect from these conditions with my standard go-to slow film, FP4 plus. That said though, it is important to clarify that I am basing this on just one outing and one roll of film, and that I by no means am a film-expert. I will use this film some more over the coming weeks, and find out how well it works for me and how I can get it to work for my style and preference.
Rocks in the ice – Konica Autoreflex TC – 50mm Hexanon f1.8 – Agfa APX100 Ilford ID-11 1+1
What I found when working with these scans in Lightroom, was that getting the correct contrast-levels was tricky. You cannot go to far before you lose your shadows and you easily blow out the whites. The images taken with the yellow filter in general give a better balance in the contrasts.
Darker areas are easily lost – Konica Autoreflex TC – 50mm Hexanon f1.8 – Agfa APX100 Ilford ID-11 1+1
In this second entry in the series “Frames of Norway” I am walking towards the viewing point “Amlisberget” to get the view over the little town Moelv and the lake Mjøsa in the east of Norway. This area of Norway has a very different landscape to it than what one often thinks of as Norwegian landscape. Rather than steep mountains and dramatic valleys and fjords, this area has a calmer, more rounded mood to it. The calm landscape forms were eroded during the last ice-age. There are a huge number of lakes and ponds, and the area has a lot of glacial till and in summer time, the area is one of the lushest farming areas of Norway.
The lake Mjøsa is the biggest lake in Norway and I will feature it in a number of entries in this series, focusing on different aspects or areas around it. Living and working in this area, it is a rather difficult to “forget” about it due to its size, and the landscape around the lake changes a lot from south to north, as well as its history.
A view over Mjøsa from Amlisberget – Canon T70 w Canon 50mm f1.8 – Ilford FP4 Plus Adox Atomal 49
The area around Moelv, has a long history for its industry and being one of the centers for trade and communication in its part of the lake. Being the “mid-point” between the bigger towns around the lake, Gjøvik, Lillehammer and Hamar, just about 20 minutes to each of the bigger towns, Moelv was an ideal loading-area for steamboats doing the so-called “across-trafic” indicating that they were crossing the lake, rather than doing longer trips along the lake. Boats doing this “across-trafic” were in general smaller boats owned by locals or smaller companies, and they would carry goods from smaller ports to the bigger port in Moelv where the bigger boats and ships would take over.
This is an interesting point, today, when we have the bridge over Mjøsa, we see the lake as an obstacle in our travels, but back then, the lake was the biggest and most efficient “highway” of the area with an incredible number of steam and motor boats sailing all over it. At some point, the church in Moelv served for a parish including farms and houses on both sides of the lake and having “church boats” to transport people across for sermons and so on. This connection between Moelv on the east-side of the lake and Redalen on the west side of the lake, is still strong today. This is also where the bridge is crossing the lake.
Woodland and farmland – Canon T70 w Canon 50mm f1.8 – Ilford FP4 Plus Adox Atomal 49
For this outing, I chose to go with a 35mm camera. I wanted to get a very “analog feel” to the images and I figured that being on a new location where I had never been before, I might get “shutter happy” and boom off a lot of shots. And I was right, I filled the whole roll in about half the trip.
A view towards Næroset – Canon T70 w Canon 50mm f1.8 – Ilford FP4 Plus Adox Atomal 49
I chose to go with the Canon T70, the revolutionizing first attempt from Canon on making a computerised camera. A camera loaded with different “safety features” such as sliders and buttons to make sure you don’t accidently open the camera mid-roll or accidentally rewind the film mid-roll. It also has a very good and accurate light-meter, and an apperture-priority setting that is working flawlessly. I also like the fact that this is a 100% Manual Focus camera and that you can focus manually without having to deal with the “sloppy” and “vague” feeling of an AF-lens. This is personal preference of course, but I prefer MF for this kind of use.
The Path – Canon T70 w Canon 50mm f1.8 – Ilford FP4 Plus Adox Atomal 49
I set out into a forest area where there are a lot of ski-tracks in the winter. I parked at Høgring, where the sports team Næroset IL has a little skiing cabin, and I walked from there. Forestry has meant a lot to this area, and previously Moelv had both a cellulose factory and a huge sawmill. The sawmill and its wood-workshop is still active and is one of Norways biggest providers of wood even today under the name of “MOELVEN”. The cellulose factory ceased operations in the late 1930’s due to the big depression in international trade.
A view over Mjøsa and Moelv – Canon T70 w Canon 50mm f1.8 – Ilford FP4 Plus Adox Atomal 49
Because the colours in the Norwegian nature is rather greyish and boring at this moment right after the snow melts, I decided to shoot black and white. I went for a traditional film, the Ilford FP4 plus, one of my absolute favourite films, and I used both yellow filter and a two-stop graduated orange filter. I was a but uncertain how the aperture-priority setting would deal with a soft-grad filter, but it seems to have correctly exposed the sky and overexposed the land-area, which was what I wanted it to do. Concidering the fact that the filter-thread on the lens is damaged, the images turned out rather well.
More forestry – Canon T70 w Canon 50mm f1.8 – Ilford FP4 Plus Adox Atomal 49
I chose to develop with Adox Atomal 49, a developer I have found myself to really like. Especially traditional films like FP4 and HP5 gives great results with this developer, and I find it to lift their abilities. It seems to be somewhat compensating and gives a rather flat negative and great shadow-detail even when the films are shot at box-speed. The down-side is its toxicity, and I find that even though I have loved my two first batches of it, I am hesitant to buy more of it because of this. I obviously collect the rest-developer and deliver it to a designated collection place where it is dealt with properly, but I still don’t like the thought of using something this toxic.
As you can see from many of the images, farming, as well as forestry is important for the area. Moelv was, and still is an important hub for the distribution and sale of grain and farming products in the area. Strand Brænneri was opened by the local farmers in the mid 1800s and was one of the first cooperative agricultural businesses in Norway, and became an important part of building Moelv and the surrounding area into the successful area it became in this time.
A lonely birch – Canon T70 w Canon 50mm f1.8 – Ilford FP4 Plus Adox Atomal 49
I am proud to live and have so easy access to an area with this amount of “cultural landscape”, and where you can really see how nature and man has lived together in peace over so many years.
With this entry, I am opening a new series of entries and also Youtube-videos. In these entries, I don’t care too much about the camera or film, but rather focus on composition and my thoughts behind the choice of location or film in regards to what I wanted to achieve. Everything is allowed in these entries, regardless of price of camera. And yes, obviously I will still have some entries in the old manner too.
For the kick-off of my new series, I chose one of my favorite cameras. My Hasselblad 500c, which not by any means is a cheap camera. I love shooting square format, and the Hasselblad along with my Ikoflex are to me the most inspiring cameras I own. There could be something with the waist-level finder that just makes everything look very lively and nice and makes composition very easy.
My location for this outing is the site of an old derelict saw-mill just north of Gjøvik. Back in the day, this was a very active saw-mill with close proximity to the lake and easy access for boat-cargo on the lake. There are still a lot of poles and marks in the shallow water after extensive log-driving on Mjøsa.
Remains from the Log-driving on Mjøsa – Hasselblad 500C w 80mm Planar f2,8 -Bergger Pancro 400 – Adox Atomal 49 1+1
Log-driving was a dangerous job and many log drivers would drown while working on floating timber. Sometimes, workers had to do the dangerous maneuver of loosening up jammed logs using a pike-pole. To utilize this tool, they had to walk on the floating logs, and sometimes, they either were hurt when the jam broke up, i.e. being crushed, or they could stamp on a loose log and fall unto the water and get stuck in the water under the massive amount of logs.
In honor of the history of these brave workers, I decided to go with a somewhat gloomy look to these images. To me, gloom means additional grain and a rather «grey» palette. A film I have often had issues with being too grainy or gloomy for my taste is the Bergger Pancro 400. I have used this film just a few times, and I still have some lying around in the freezer. I thawed up one of them and went for this choice.
Remains from the Log-driving on Mjøsa – Hasselblad 500C w 80mm Planar f2,8 -Bergger Pancro 400 – Adox Atomal 49 1+1
It turned out better than I expected, and this film might just be perfect for this kind of shooting. A few pieces of reflection though are the following:
Be very precise when exposing Pancro 400 as it handles underexposure extremely poorly and easily loses the highlights. I tries my best to nail my exposures dead on, and did reasonably well until my lightmeter decided to produce a flat battery. After that I had to rely on a simple app on my phone, which surprisingly worked rather well.
Take your time with this film. I have tried different development cycles for this film, but this is by far my best results with it. I often shy away from very long development times of more than 12 minutes if possible, but to me, it seems like the results with Pancro400 gets better the longer you develop. This process in Adox Atomal 49 1+1 took 23 minutes.
Fix for more than the double time of what you would normally do. As in the previous point. Time is gold with this film. I fixed this one in fresh fixer for 12 minutes, double the time recommended by Bergger, and that seems to give clean negatives. Anything gives harsher grain due to remaining emulsion I guess?
Use it for its potential of making moody and gloomy shots. This is not an «everyday happy snappy film». You have to work with its strengths.
The remains of Biri Bruk – Hasselblad 500C w 80mm Planar f2,8 -Bergger Pancro 400 – Adox Atomal 49 1+1
From my research online, I find that the sawmill was active until the early eighties. I cannot guarantee my accuracy here, but it was defunct before the nineties. In 1994, Lillehammer hosted the Winter Olympics, and the old sawmill was being restored, the goal being it becoming a restaurant. Situated along the road between two venue-towns, Lillehammer and Gjøvik, the location was ideal.
During its restoration, something happened and the old sawmill house caught fire and burned to the ground on Friday the fourth of June 1993. The fire started in the old chip-silo and quickly spread resulting in devastating damage with fire-fighters unable to over-win the fire. Today, only the foundation walls are left, and is what you can see photographed in some of these images.
Ruins of Biri Bruk – Hasselblad 500C w 80mm Planar f2,8 -Bergger Pancro 400 – Adox Atomal 49 1+1
For me, this location has some personal value. My grandfather used to work in this place as a lorry-driver for many years, and when walking around, I can still hear his voice takling about all the interesting and struggle some days they had at work in this old sawmill. What was important for me in this outing, was to capture the mood of the place in regards to its history and how it is a symbol of a very decentralized way of structuring agriculture. And maybe most important, how we still have some remains of a very active workplace in a very smack little settlement.
Remains from the Log-driving on Mjøsa by Biri Bruk – Hasselblad 500C w 80mm Planar f2,8 -Bergger Pancro 400 – Adox Atomal 49 1+1
I hope you enjoyed reading this entry, and that you can catch the mood I am trying to convey through them. I would also love hearing your thoughts about Bergger Pancro400 and if you have different or supporting experiences.
A few days ago I went out very early in the morning. The forecast showed slightly cloudy weather and I figured that a sunrise in these conditions would be lovely and colourful with smooth yellows and subtle peachy oranges. I only had one roll of Kodak Ektar 100 left and it was a 35mm roll. I tend to shy somewhat away from the high saturation of Ektar in 35mm format, as I have had difficulties scanning and processing it in the past. This time I went for a different approach where I converted manually rather than using scan-software or NegativeLabPro plugin, and I must say that I had more success this time.
I chose to use the Olympus OM-1 for this outing. The main reason for that being that it has a stable function with cable-release and that it has the option of “mirror lock up” that I figured would be very handy when shooting a 100 ISO film in the early morning. My shutter times went up to a second and I did not experience any camera shake at all for any of the images except the one where I forgot to lock up the mirror which is strictly not the camera’s fault.
Along the path – Olympus OM-1 w 50mm Zuiko f1,8 – Kodak Ektar 100
My location for this outing was Steinsodden in Ringsaker, and I also went to the very interesting little islet named “Steinsborga”. This little islet is only accessible in springtime when the water-level in the lake is regulated down over the winter and before the snow-melt in the mountains hit the lake in mid-may. I did not take any images out on the islet, but it would definitely make for a separate trip if the old medieval castle ruins were not blocked off with “LOVELY” barrier tape.
Reklamer
As always, the Olympus performed beautifully and the images were sharp and well exposed. All functions on the camera worked as they should, and the shutter-speeds are fairly accurate. If I was asked to recommend a fully manual and mechanical camera to anyone wanting to buy one, I would without any doubt say Olympus OM-1. The large and bright viewfinder makes composing easy, it is smooth and easy to use, and the build-quality is superb. I would also say, that for my eyes, it is one of the most beautiful camera designs I know. It is small and light, has a really nice shape all around and feels sturdy and reliable even in 2021, at around 50 years of age. I don’t know if my OM-1 has ever been serviced.
For my experience with Ektar this time. I absolutely love using Ektar for medium format, but as I wrote earlier, I have found it very difficult to scan and process in 35mm. I have tried both using scanning software for conversion as well as using Negative Lab Pro and Grain2Pixel, but every time I have ended up with either insane grain, garish colours or over-saturated contrasts. This time, however, I went with a different approach.
A calm landscape view – Olympus OM-1 w Zuiko 50mm f1,8 – Kodak Ektar 100
I scanned the negatives as RAW-files with my Epson V600 using Silverfast, and manually converted them in Photoshop. I then compressed the histogram using the different colour channels on “levels” to hold more control over the process. For the first time, I can say that I am getting towards being happy with my Kodak Ektar 100 results for 35mm format. There is still some practise needed, but I think the “full manual” could be my way to master the art of the Ektar 35mm.
A little while back, I bought some rolls of Fujifilm C200 colour negative film. A consumer film I remember very well to have used as a photo-interested teenager. Back then I had a Nikon F60, a camera that sadly has stopped working and that is too expensive to have repaired. I upgraded it with a Nikon F80 after it died. When I tried C200 again, I was excited to see how well this film actually performs, even today in 2021. On my first tryout I shot it at 160 just to be sure that I biased towards over-exposure and not under-exposure. I realized that I lost some shadows at 200, and I decided to go out once again the other day, but this time, I shot it at ISO 100. One stop over-exposure. I was a bit nervous about this tactic as I don’t know the films characteristics that well. I was afraid I would get the very «washed out» colours you get when you over-expose Fuji-films too much, but I needn’t worry.
My chosen camera for this outing, was the Canon T70. A camera that I find to have a very good light-meter and aperture-priority setting. Since I was out walking and scouting for possible locations, I shot it using aperture-priority. The camera is manual focus and you can set your aperture, so this program gives med decent control over my exposures even if I am not controlling the shutter-speeds myself.
An iPhone snap of the Canon T70. When this image was taken it was on frame 24.
Over-exposing colour negative film is normally not an issue. The dynamic range is made to deal well with over-exposure and you get more details in the shadows. Exactly what I wanted for this outing. My location this time is Steinsodden, a little islet that is accessible by foot in spring-time when the water in the lake is low. Once the snow-melt in the mountains pick up and reach the big lakes, this islet is inaccessible without either using a boat or getting wet. The name of the Islet is «Steinsholmen» or «Steinsborga» as the locals say. It is home to the ruins of a medieval castle that you can read more about if you google «Mjøskastellet». The ruins are protected, and when I was there id didn’t see any reasons to photograph it, as some moron has figured out that putting up barrier-tape around was a marvelous idea. It is just ugly and dis-respectful to the historic site and I guess the medieval king who got it built will haunt this moron forever! (At least I hope)
Reklamer
But.. No-one reads this blog for my thoughts about barrier-tape in nature, you want to see my images:
The path – Canon T70 w Canon 50mm f1,8. f8 – Fujifilm C200@100 Tetenal C41
The first image I am going to show here, is this lovely image of the path leading towards the islet. I just love all the leading lines giving this image the depth it has, and I also love seeing that I have retained so much shadow-detail with my process of over-exposing. I was a bit concerned as the day was very sunny, but not even the sky in the background is completely «blown out». Also, with my Epson v600 scanner, this film is very easy to scan. I am having trouble getting good scans of 35mm Ektar, but the C200 really is a star.
Some nice rocks – Canon T70 w 50mm Canon f1,8 – Fujifilm C200@100 – Tetenal C41
I really love the way this image turned out. I cannot remember whether this image was taken at f4 or f5,6, but it gives a very nice focus area, and a very smooth and sift background. It is so nice that the snow is melting and that I once again can take these nature-detail images that I love looking for. I have not corrected this image for sharpness or haze, but I have tinted the colours slightly, as they were a tad too green for my liking.
Reklamer
The last one that I will show in this post, is a shot at your famous f11. The main setting of the landscape photographer. It is an early afternoon view over the lake and the weather was indeed very sunny and harsh. Even so, I see that the film coped very well with the over-exposure and I am very pleased with how it turned out.
I am actually surprised how well this film works and considering its price, it is quite good value for money. I might very well be shooting it again soon.
One of my favorite subjects for my photography is driftwood and other types of old wood, such as dry tree-roots or fallen branches that has been lying around for a while and gotten touched and greyed by the elements. To me, this represents a strength and a a token of persistence shown by nature. Yesterday, I was out very early in the morning, before sunrise with just the colours trying to capture them with my Hasselblad. Once my roll of KODAK Ektar was filled, I broke out my Olympus OM-1 with its incredible 50mm Zuiko lens and a roll of Kodak Tri-X in search of some driftwood.
Just a little sneak-in from the Hasselblad because I absolutely love this image – Hasselblad 500C – Planar 80mm f2,8 – KODAK Ektar
My location for the morning was Husodden in Søndre Land. A secluded little headland in the lake Randsfjorden, home to amazing sunrise-light and a wide selection of birds and forest colours in the summer. It is also the home of a little air-strip used by the local flying enthusiasts. I didn’t meet any of them this morning, but I made sure not to be in their way if they were coming.
Reklamer
After sunrise, but when the light was still rather bleak, I got soft and nice contrasts, but seeing the conditions become more and more contrasty, I decided to shoot tie Tri-X at 200 instead of 400. The only filter on the lens was a Hoya UV-filter, that I find to be helpful on this lens. Although it is supposed to be Multi-coated, I have found it to react somewhat with haze if used without. (Could be anything else as well, I am no lens expert)
Details in the old bark – Olympus OM-1 – 50mm Zuiko f1,8 – Kodak Tri-X @ 200 – Adox Atomal 49 1+1
It never ceases to fascinate me how incredibly nice the textures in old wood can be. The image above here was taken of a very small detail on a bigger log, but really shows the worn details in that old bark and how incredibly beautiful that is if you isolate it like this. I also thin that pulling the film a stop was the correct choice for this occasion, as it gave me the opportunities to shoot wider apertures such as this f2,8 with the shutter speed 1/250th. I don’t trust the Olympus at 1/1000th after having some uneven exposures with that shutter-speed. Also, I do appreciate the extra shadow detail, but I don’t think that would have been an issue with Tri-X at this shot anyway.
For development, I chose to go with Adox Atomal 49. A developer I have used a lot the last months. I bought it after having some «bad» experiences with my usual Kodak X-tol where it didn’t mix properly (two batches) and I was curious about trying something new. Ive found Atomal to be a brilliant match with many of the films I use, especially Tri-X and FP4 plus, but also HP5 plus and Fomapan 100. It gives me very fine grain and seems to give very nice grey-tones and full film speed. Trouble is, it is somewhat cumbersome to mix and consists of three bags of powder rather than two. It has also «coloured» my 5L-container red and I will have to get a new jug for the next batch.
This old log – Olympus OM-1 – 50mm Zuiko f1,8 – Kodak Tri-X @ 200 – Adox Atomal 49 1+1
The image above is taken at f 5,6 and shutter speed 1/125. I just love the lines and how it almost seems charred in the dark-area to the right bottom. The balance in this image is very soothing I find, and it really shows why I find the Olympus to be my favorite 35mm Camera.
Since I was at an airfield – Olympus OM-1 – 50mm Zuiko f1,8 – Kodak Tri-X @ 200 – Adox Atomal 49 1+1
I shot 36 images of drift-wood in different ways and I only included my top-picks here. However, on my way back to the car, I spotted the wind-indicatorthingie (whatever it is called) and decided that I would attempt a 37th frame. I find that the «last image» don’t always come out, but I figured it was worth giving it a shot. I think this was f8, but it did not take any notes about this shot.
Today I was out and about with one of my lovely analog cameras again looking for locations for some early-morning sunrise photo trips. I came across this lovely location called «Husodden» not too far away from where I live. Being sensible and staying local is an important part of the world we currently live in. While I was walking around Husodden to shout for possible locations, I did some photographs with the Olympus OM-1 and a roll of Rollei RPX25. I metered it at around ISO 18 (My light meter goes to ISO25, so I opened the aperture slightly more) and shot with an orange filter to get the popping effect in the sky and boost the contrasts a bit.
Randsfjorden, the lake, was still frozen and it became a white carpet in many of my images, and gave some extra contrast as well.
I tried to use the remainders of the snow as a lead-in line in many of my images, and I aimed for a very large separation between snow and sky. In retrospect, some of these images would have benefited more from being shot with a graduated filter rather than a fill orange one.
I decided to develop the film with «an old friend». Kodak HC110. I have not used this developer for a very long time, but there was something about the shots I took today, that made me bring out the golden syrup and mix Dilution B. HC110 used to be my favorite developer and, it is very economical and gives really nice greys. Also, there is something about it that I just like. I don’t really know what it is, but there is something about using that thick concentrate and stirring it properly that really wakes the «geek» in me.
A quick and pleasant day out for me today, and I am really looking forward to visiting this location again at some point in the near future. Both for woodland detail work and for early morning sunrise-shots.
On a foggy, snowy day a short while ago, I shot about half a roll of Rollei Retro 400s with my Olympus OM-1, aiming at capturing the hard contrasts of the really nasty weathered day. I cut the outing short because it got very difficult and nasty to work in the wet and snowy gale. I cut the film out of the camera, and saved the rest for another day. That day came, and I put it into my Canon T70 and went to a local church that I find very interesting to shoot.
Because of the conditions on this particular day, I chose to overexpose the film by one stop to 200, and shave off 20% of the development time. Basically a one stop pull. This would give me more shadow-detail and give me more to play on with the apertures on a bright afternoon in the snow. I never got to use that last point, as it turned out that the total number of frames left on the film was EIGHT.
Aas church on a bright afternoon – Canon T70 – Rollei Retro 400s – Foma Fomadon Excel 1+0 7m30s
My negatives were more contrasty than I thought they would be, so I am very happy that I pulled the film one stop for this shoot. I mainly shot at f11 and f8 for this outing, and I have to say that I think the little 50mm Canon Lens performs rather well. For a standard kit-lens it is decently sharp and helps me capture the moods I want. I have, however, seen some diffraction on f22, and I avoid that aperture when using this camera.
Reklamer
The aperture-priority setting on the Canon seems to work very well. Even on these shots, where the sky was very bright, I managed to retain decent detail in the sky, showing the cloud-formations etc, without using any filters.
A naked graveyard tree – Canon T70 – Rollei Retro 400s – Foma Fomadon Excel 1+0 7m30s
I also have a hard time walking past an interesting looking trees, and I saw one at this grave yard by the fence by some graves. Because of the deep snow, I was not able to study the tree and identify what type of tree it was, but it made for a really lovely composition. I shot it from two different distances because I was uncertain which one that would be the most efficient. I will include both here.
The same tree further away – Canon T70 – Rollei Retro 400s – Foma Fomadon Excel 1+0 7m30s
I also attempted a cool shot of the entry area of the church, but I am not very pleased with how it turned out. I find that it is a rather «bland» composition and that it does not either emphasis the contrast nor the shapes of the church in the way I imagined it would. This would probably have worked better if shot at box-speed.
Not very pleased with this one – Canon T70 – Rollei Retro 400s – Foma Fomadon Excel 1+0 7m30s
A few days ago, the weather and conditions were perfect for a little afternoon outing, and really worked set itself up for some lovely muted colours. Since I had some C41 chemistry and a few rolls of different colour films, I decided to go for Kodak ProImage 100 and the Canon T70.
I wanted to shoot hand-held, and I wanted a film that is gentle with the colours, but not either over, nor under-saturated. As it later turned out, my C41 chemistry is probably shot. The scans I got had a severe cyan-green cast, and since the C41 mix is three months old, I wouldn’t be surprised if it is a dying blix.
I chose to drive up to an old outdoor-museum, a museum with an old, lovely yellow farm-buildingand some old houses. The area is accessible for everyone at any time, and walking around there is very relaxing, since there rarely are too many people around.
The break point of a fallen branch – Canon T70 w Canon 50mm f1.8 FD – Kodak ProImage100 (somewhat colour corrected)
Outside the main farm building, there was evidence of a snowy winter with heavy and mild snow. Big branches had broken off the tree outside the main building and I took the chance of photographing them, as they are likely to soon be removed when the snow melts. The broken branches made for some nice compositions in themselves, but they also «framed» some other nice elements, such as wilted autumn leaves, that have been buried by the snow over a long winter.
Reklamer
A wilted maple leaf – Canon T70 w Canon 50mm f1.8 FD – Kodak ProImage100 (somewhat colour corrected)
This time with the Canon, I went for images demanding wider apertures. The last time I used the camera was a very bright day, and I mainly shot f11 and occasionally f8. This time, my narrowest aperture was f4, and in most cases, the lens seems to perform very well: The images have a sharp and defined focus, and creates a soft bokeh that is very pleasant to the eye. There are no evidence of any vignetting or other issues with the lens at these apertures. But I have found it to have some diffraction when used at f22 (not in this outing obviously), and I will avoid that in the future.
Yet again, the persistent winter of 2021 struck back at us with all its wreath. After a few weeks of impeccable weather and a really pleasant spring mood, we were once again confronted with the face of King Winter. When I went out yesterday, it was blowing a gale and the snow flew thick in the air. Thicker than horse-flies at a swamp in the summer. The weather was bland and uninspiring and being out there was nasty and uncomfortable. Yet, I had something in mind.
I wanted to capture the foggy and snowy day with a gritty and grainy mood. I chose to go for a BW film. The Rollei Retro 400s, which is a film I have used a bit before and that I find to suit my way of shooting very well. My thinking was that the 400 ISO film would give me just the right amount of grain and contrast, as well as giving me the opportunity to shoot hand-held, which is very handy in windy conditions, where camera-shake due to wind is a real danger, even with a sturdy tripod.
A fallen branch – Olympus OM-1 w 50mm Zuiko f1,8 – Rollei Retro 400s – Rodinal 1+100
I shot about half a roll of film, focussing on making quick compositions around branches that, over the winter with heavy snow, has broken off bigger trees. The foggy and snowy conditions makes these branches stand out as interesting shapes, and shows them for the beauty they are. WIth the added grain from the film and the additional grain and contrast from the use of Rodinal 1+100 Semi-Stand gave that somewhat “raw” look I was going for.
Reklamer
The camera I chose to use, was my brilliant Olympus OM-1. This is a camera I trust at all shutter-speeds and that I know will work regardless of conditions. However, I noticed two issues on this particular outing. first and foremost, there was a little piece of dust that obstructed my view through the viewfinder. I used it as it was when out shooting, because I did not want to take the lens off in the middle of the show-storm. When I took the lens off, there was a little piece of dust on the focussing glass. How this ended up there is unknown to me, I have not taken the lens off this camera for months, and it has not been there before.
A fallen branch – Olympus OM-1 w 50mm Zuiko f1,8 – Rollei Retro 400s – Rodinal 1+100
It also seems to give uneven exposures at the highest shutter-speed 1/1000th, I even got a blank frame that I know was shot with this shutter-speed. This has also never happened to me before, and I will keep an eye on this in better conditions.
All in all, I got the images I wanted, and all in the matter of around 15 minutes in the snowy gale. Thank you for following and reading, I hope you enjoy my images.
Cheap Camera Adventures 