I am not usually bulk-rolling film, but not long ago, I got hold of a 100ft roll of Agfa APX100 for very cheap money. I decided to give it a go, as I have previously been very fond of affordable films like the Fomapan 100 which I also tend to bulk-load, as it is relatively inexpensive to do. I have found my way of exposing and developing Fomapan 100 that gives me the results I want. This method includes exposing at EL 50 and shave 20% off the recommended development time with Kodak Xtol 1+0.

As the Agfa APX100 is a brand new film for me, I decided to shoot it at box-speed and develop as the massive development chart suggests. As Kodak Xtol have been out of stock in Norway for a very long time now, I decided to use Ilford ID-11 to develop this film. I chose the dilution 1+1.

Immediately, when looking at the negatives and their scans, they appear slightly under-exposed, and it is clear to me that this film needs more exposure than I gave it at this first tryout. Especially definition in the darker areas is easily lost, and I think that a slight pull could give me a flatter negative that will be easier to work with in post-processing. My next roll will be tested with the method I use for Fomapan 100, and I will evaluate those results as well.

For this test, I chose to go with the Konica Autoreflex TC. A camera I bought this autumn and that I have found to work very well and be reasonably accurate at shutter speeds faster than 1/60, which is the area in which I chose to shoot this time. The lens is a very standard Hexanon 50mm f1.8, a lens that is reasonably sharp and is easy to focus. Some of the images were shot using a yellow filter and some without the yellow filter.

The film has the amount of grain that I would expect from a 100 ISO traditional film and it seems to me as it behaves very much like the Fomapan 100 in its sensitivity. The lighting conditions on the day were quite contrasty, and I find that to be very clear from the negatives. They seem more contrasty than I would expect from these conditions with my standard go-to slow film, FP4 plus. That said though, it is important to clarify that I am basing this on just one outing and one roll of film, and that I by no means am a film-expert. I will use this film some more over the coming weeks, and find out how well it works for me and how I can get it to work for my style and preference.

What I found when working with these scans in Lightroom, was that getting the correct contrast-levels was tricky. You cannot go to far before you lose your shadows and you easily blow out the whites. The images taken with the yellow filter in general give a better balance in the contrasts.